[V3.0.1] QRD SparkN5 Version Release Notes

QRD Spark N5 Version 3.0.1

Download

Changes:

• 1. - Wired Xinput polling rate improved.
• 2. - Added wireless Xinput mode. - 

[Bluetooth Wireless Connection]

When controller is turned off:

① Press and hold X+Q(Home) for 3 seconds: Connect for X-input mode;

② Press and hold SHARE+Q(Home) for 3 seconds: Connect for D-input mode;

If you need to switch between D-input & X-input modes in Bluetooth mode, you need to manually turn off the controller and then reconnect it.

• 3. - Minor performance improvements.
• 4. - Added 3 sensetivity zone presets for LS and RS.  
• Circular Mode

• Square Mode 

• Diamond Mode

- Default preset is Circular, to change the preset press and hold OPTION+L3 for 2 seconds.

- presets change in order of Circular->Square->Diamond->Circular...
LED light stays white for 1 second for Circular,
green for 1 Second for Square,
red for 1 second for Dianmond preset.
Active preset is saved on power-off.

 

Operation:

1. Disconnect and turn off the controller.
2. open firmware update software "QRD SparkN5 V3.0.1"
3. Press and hold Triangle▲ Buttons.
4. Connect the controller via USB cable.
5. Once Connected "Exit" button turns to "Update"
6. Press "Update" button to start the update and wait for operation to complete.
7. Once update is completed "PASS" message appears next to the "Update" button.
8. Close the firmware update software.