QRD SPARK N5 RGB LED Lighting Setup Guide

The QRD SPARK N5 controller includes customizable RGB lighting effects around the joysticks and button backlight areas. You can adjust the lighting mode directly with the SET button while the controller is powered on.
This guide explains how to switch RGB lighting modes, turn off the lighting effects, and troubleshoot abnormal LED behavior.

LED Lighting Control Instructions

Switch Lighting Modes

While the controller is powered on, press the SET button once to cycle through the available RGB lighting modes.

Available lighting modes include:

• Blue breathing mode
• Cyan blue breathing mode
• Purple breathing mode
• Yellow breathing mode
• Red breathing mode
• Orange breathing mode
• Green breathing mode
• White breathing mode
• Multicolor auto-cycle mode

The controller supports multiple single-color breathing effects and one automatic color-cycle effect.

Turn Off RGB Lighting

To turn off the RGB lighting effects:

• Press and hold the SET button for approximately 3 seconds.

This turns off the joystick and button-area RGB lighting effects.

Important note: Turning off RGB lighting does not turn off the front indicator light. The front indicator light is used for controller status and may remain active depending on the connection or charging state.

Lighting Memory Function

The QRD SPARK N5 saves the selected lighting mode automatically.

After the controller is powered off and turned on again, it will resume the previously selected lighting mode.

Common RGB LED Issues and Troubleshooting

LED Effects Are Not Working or Display Abnormally

If the RGB lighting does not work correctly, displays abnormal colors, or does not switch as expected, update the QRD SPARK N5 firmware using a PC and USB cable.

Use firmware V3.1.06 or newer if available.

Official firmware page:

👉 QRD Spark N5 Firmware Version 3.1.06 Release

When updating firmware, follow the official instructions carefully. Do not disconnect the USB cable or close the firmware program during the update.

SET Button Does Not Respond

If the SET button does not change the lighting mode:

1. Make sure the controller is powered on.
2. Confirm the controller is properly connected or paired.
3. Press the SET button once to switch lighting modes.
4. Press and hold the SET button for approximately 3 seconds to test whether the RGB lighting can be turned off.
5. If the issue continues, reset the controller.

Reset the Controller

If lighting control remains abnormal, use the hidden RESET button on the back of the controller.

• Press and hold the RESET button for approximately 3-5 seconds.

After resetting, power on the controller again and test the SET button.

The reset may clear temporary controller status or pairing behavior. If needed, pair the controller with your console, PC, or mobile device again.

When to Contact QRDGAME Support

Contact QRDGAME Support if the RGB lighting still does not work after:

• Confirming the controller is powered on
• Testing the SET button
• Resetting the controller
• Updating the firmware
• Reconnecting or pairing the controller again

Support email:

support@qrdgame.com

When contacting support, provide the controller firmware version, connection platform, and a short video showing the LED issue.