QRD Maestro S3 Version 1.05
| QRD Maestro S3 Version 1.05 | Download |
To use the firmware update software:
- - Disconnect and turn off the controller. If the controller is running in wireless mode, it can be turned off with reset button on the front.
- - Open the firmware update software.
- - Press and hold 2P button on the controller then connect the controller with usb cable while holding down 2P button. press update button on the firmware update software and wait untill the update is finished.
- - The controller will restart and operate normally once the update is done. Close the firmware update software.
Version Notes:
- - Added SOCD mode "Last Input Wins", SOCD modes are selected with OPT+UP each time switchches to the next mode:
SOCD1(up wins)->SOCD2(capcom)->SOCD3(last input wins)->SOCD4(EZ-mode)->SOCD1->SOCD2...
- - High Latency mode (opt+3p) removed. Avaliable latency modes: medium(opt+4p), low(opt+3k), lowest(opt+4k), automatic(opt+2k):
For QRD Maestro S3