[QRD SPARK N5] Como Resolver o Desvio do Joystick do QRD Spark N5 – qrdgame

Como resolver o desvio do joystick QRD Spark N5

Como Resolver o Desvio (Drift) do Joystick QRD Spark N5

Alguns jogadores podem encontrar desvio do joystick ao usar o controle QRD Spark N5. Esse problema geralmente está relacionado ao desalinhamento da tampa do joystick ou à calibração automática dos joysticks de Efeito Hall. Abaixo estão dois passos simples para ajudar a resolver esse problema e restaurar o uso normal:

Passo 1: Ajuste Manual da Posição do Joystick

Devido a longos períodos de envio, a tampa do joystick pode se soltar do sensor Hall dentro do controle, causando o desvio do joystick. Recomendamos ajustar manualmente a tampa do joystick para garantir que ela esteja corretamente alinhada ao centro.

Como Fazer:

  1. Desconecte o Controle: Primeiro, desconecte o controle do console ou de qualquer dispositivo.

  2. Remova a Tampa do Joystick: Puxe gentilmente a tampa do joystick do joystick.

  3. Ajuste a Tampa do Joystick: Após remover a tampa, gire lentamente a base da tampa do joystick no sentido horário ou anti-horário por 3-4 voltas. Certifique-se de que não haja folgas ou resistências incomuns durante esse processo.

  4. Realinhe ao Centro: Uma vez que a rotação esteja suave, certifique-se de que a tampa do joystick esteja alinhada ao centro, então pressione-a gentilmente para fixá-la no lugar.

 

🕹️Passo 2: Mude da Calibração Automática para a Calibração Manual

Por que Calibração Manual?

O QRD Spark N5 é equipado com joysticks de Efeito Hall que originalmente dependiam de calibração automática. No entanto, alguns usuários relataram desvio do joystick quando os sticks não estavam completamente ociosos durante a inicialização.

Para resolver isso, introduzimos um modo de calibração manual no firmware V3.05, permitindo que os jogadores desativem a calibração automática e calibrem seus joysticks manualmente. Isso garante um controle mais preciso e elimina problemas de desvio.

👉 Importante: Você deve atualizar seu controle para o firmware V3.05 antes que a calibração manual esteja disponível.
Baixe aqui:
https://qrdgame.com/blogs/software/v3-1-06-qrd-spark-n5-firmware-version-3-1-06-release


Calibração manual:

  • - com o controle desligado, segure [TURBO+OPTION+HOME] por 3 segundos para entrar no menu de configurações de calibração. (O [LED HOME] começa a piscar em amarelo indicando)
  • Pressione [X] para DESLIGAR a Calibração Automática e continuar para a calibração manual.
  • - Gire RS e LS lentamente e completamente tocando os cantos do anel 4 vezes.
  • - Pressione e solte R2 e L2 completamente 3 vezes.
  • - Uma vez que dados suficientes são coletados para a calibração dos sensores Hall, o controle vibra uma vez. O usuário pode prosseguir para o próximo passo.
  • - Coloque o controle em uma superfície plana e estável, então pressione [OPTION] para iniciar a calibração do Giroscópio.
  • - Uma vez que a calibração do Giroscópio é finalizada, o controle sai das configurações e retorna ao modo de espera.

Tutorial em vídeo: 

 



The QRD SPARK N5 uses Hall Effect joysticks to provide smooth analog control while reducing wear-related stick drift.

If you notice that your character, camera, or cursor moves slightly even when the joystick is released, this does not necessarily mean that the joystick hardware is defective.

In many cases, drift-like behavior can be caused by:

  • Joysick caps loosing
  • Incorrect automatic calibration
  • Moving the joysticks or analog triggers while the controller is starting
  • An incorrect calibration reference
  • Improper joystick sensitivity or deadzone settings
  • Game-specific deadzone settings

Please follow the troubleshooting steps below in order.


Manually Adjust the Joystick Position

Due to long periods of shipping, the joystick cap may become loose from the Hall sensor inside the controller, causing the joystick to drift. We recommend manually adjusting the joystick cap to ensure it is correctly aligned at the center.

 How to Perform: 
Como resolver o desvio do joystick QRD Spark N5
  1. Disconnect the Controller: First, disconnect the controller from the console or any device.
  2. Remove the Joystick Cap: Gently pull off the joystick cap from the joystick.
  3. Adjust the Joystick Cap: After removing the cap, slowly rotate the base of the joystick cap either clockwise or counterclockwise for 3-4 turns. Make sure there are no unusual looseness or resistance during this process.
  4. Re-align to the Center: Once the rotation is smooth, ensure the joystick cap is aligned to the center, then gently press it down to secure it in place.

 Restore Automatic Calibration Mode  
STEP 1: Enter Calibration Settings
  • - while the controller is turned off, hold down the [TURBO+OPTION+HOME] for 3 seconds to enter calibration settings menu. ( [HOME LED] starts flashing yellow color indicating)

STEP 2: Enable Automatic Calibration

While the HOME LED is flashing:

Press:

Square (□)

Pressing □:

  • Turns Automatic Calibration ON
  • Exits Calibration Settings
  • Returns the controller to standby mode

Automatic Calibration has now been successfully restored.

 Restart the Controller Complete the Auto-Cali bration

 Test the Controller Again 

https://hardwaretester.com/gamepad

After completing the automatic calibration process:

  1. Release both joysticks.
  2. Make sure LS and RS return naturally to the center position.
  3. Launch the game where the drift occurred.
  4. Leave both sticks untouched.
  5. Check whether the character, camera, cursor, or vehicle still moves by itself.

If possible, also test the controller:

  • In another game
  • On another PC or console
  • In a gamepad input testing tool

This helps determine whether the issue is coming from the controller itself or from a game-specific deadzone configuration.


If Automatic Calibration Does Not Solve the Problem, Use Manual Calibration

Manual Calibration should normally be used after:

  1. Firmware has been updated
  2. Automatic Calibration has been restored
  3. Startup calibration has been completed correctly
  4. The controller has been hardware-reset and retested

If the joystick still behaves abnormally, Manual Calibration can be used to redefine the analog movement range directly.

QRD SPARK N5

Manual Calibration Tutorials Video

Official tutorial

03:45

Follow each step carefully. Do not disconnect the USB cable during the update.

View on YouTube
STEP 1: Enter Manual Calibration Mode
  • - while the controller is turned off, hold down the [TURBO+OPTION+HOME] for 3 seconds to enter calibration settings menu. ( [HOME LED] starts flashing yellow color indicating)
STEP 2: Disable Automatic Calibration

Press:

Cross (×)

This:

Turns Automatic Calibration OFF

Enters Manual Calibration Mode

Once Automatic Calibration has been disabled, complete the entire manual calibration procedure before returning to normal use.

STEP 3: Manually Calibrate the Hall Effect Joysticks
  • Slowly rotate the LS around its complete physical range.

Complete at least: 【4 full rotations】

Make sure it touches the full outer movement range in every direction.

Do not make fast or incomplete circles.

The calibration system needs complete minimum and maximum analog-range data.

STEP 4: Manually Calibrate the Analog Triggers
  • Slowly press:

    L2&R2 → fully down → release

Repeat at least: 【3 times】

After enough Hall sensor calibration data has been collected, the controller will briefly vibrate.

This vibration confirms that joystick and trigger calibration has been completed successfully.

STEP 5: Calibrate the 6-Axis Gyroscope

Place the controller on a:

Flat surface

Stable surface

Level surface

Motionless surface

Do not hold or move the controller.

  • 【Press: OPTION】

The controller will begin calibrating the built-in gyroscope.

Keep the controller completely still.

When calibration is successfully completed:

The controller will vibrate

Calibration Mode will close automatically

The controller will return to standby

Manual Calibration will remain enabled

You can now reconnect the controller and test the joysticks again.

Finish the Test again


Check the Game's Deadzone Settings

×

2026 BLACK FRIDAY!

Sign up for our newsletter to receive exclusive drops, special offers, and your instant discount code.

No thanks, I prefer paying full price